A-A-521A
3.4 Illustration. Except for the technical requirements (e.g., design, dimensions), the illustration herein descriptive and is not intended to preclude the purchase of items otherwise conforming to the requirements of this description.
3.5 Identification Marking. The saw shall be marked with the manufacturer’s name or identifying symbol, and the state or country of manufacture, unless otherwise specified. All identification markings shall be engraved, etched, molded, or intended directly on the item’s surface in such a manner that it remains clearly legible throughout the life of the item.
3.6 Safety warning. The saw housing shall be stamped, labeled or otherwise marked by the manufacturer with the following: WARNING* USE SAFETY FOOTWEAR, SNUG FITTING CLOTHING, PROTECTIVE EYEWARE AND PROTECTIVE FACE SHIELD, RESPIRATORY PROTECTION AND HEAD PROTECTION DEVICES WHILE USING A CUTTING OFF MACHINE.
3.7 Workmanship. The saw, including all parts and accessories, shall be free from fins, burrs, rust, imperfections and any other defects which may impair serviceability, durability, or appearance.
4. REGULATORY REQUIREMENTS.
The issue of SAE Standard J1349, UL Standard 30, FM Standard 6051/6052, ANSI B7.5-1990 and ANSI B7.1-1988, in effect in the date of the solicitation shall be used to determine compliance with stated requirements.
4.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS.
5.1 Contractors Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer’s own drawings, specifications, and quality assurance practices, and is the same product offered for sale in the commercial marketplace. When specific quality assurance provisions are specified for any commercial characteristic, the contractor shall maintain records resulting from his inspection(s) conducted in accordance with the specific quality assurance provisions. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The Government reserves the right to audit the contractor’s quality assurance records.
5.2 Responsibility of Inspection. Unless otherwise specified, the contractor is responsible for the performance of all inspection requirements and may use any commercial facilities (including the contractor’s own facilities) suitable for performance of the inspection requirements, unless disapproved by the Government. The Government reserves the right to perform any inspections deemed necessary to assure the item conforms to the specified requirements.
5.3 Bid sample(s). When a bid sample requirement is specified in the solution, the bid sample(s) shall be inspected for all salient characteristics. A failure of any first article sample to meet the salient characteristics shall be cause for rejection.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business