A-A-52593A
2.5 Lubrication. The air motor shall be lubricated through a standard air line lubricator. The reciprocating mechanism shall be provided with a means of flood lubrication of the cam and cam follower.
2.6 Identification marking. The required marking for the saw shall be limited to the supplier’s name or trademark, model, serial number and stock number. Identification plates shall be made of a material suitable to withstand the environmental conditions expected to be experienced during operation and storage of the saw.
3. REGULATORY REQUIREMENTS
3.1 Recovered material. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulation.
4. PRODUCT CONFORMANCE PROVISIONS
4.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).
4.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID and the product conforms to the producers own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
5. PACKAGING. Preservation, packing, and marking for the desired level shall be as specified in the contract (see 6.2).
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory).
6.1 Addresses for obtaining copies of referenced documents.
6.1.1 Government documents. The Federal Acquisition Regulation (FAR) may be obtained from Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954 or from https://acquisition.gov/far/. Copies of A-A-59439 “Coupling Halves, Quick-Disconnect” are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or website https://assist.daps.dla.mill/quicksearch/.
6.2 Ordering data. Acquisition documents must specify the following:
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business