[INCH-POUND]
A-A-2692A
August 10, 1995
SUPERSEDING
A-A-2692
July 1, 1991
COMMERCIAL ITEM DESCRIPTION
WRENCH, IMPACT, PNEUMATIC, PORTABLE (BODY GRIP)
This Commercial Item Description is approved by the Commissioner, Federal
Supply, Service, General Services Administration, for the use of all Federal
agencies.
1. Scope. This commercial item description covers portable, pneumatic
impact wrenches used for tightening and loosening bolts and nuts.
2. Salient Characteristics.
3. Design. The wrench shall be similar to Figure 1 and comply with the
performance criteria in Table I. The wrench shall be equipped with a body-grip
style handle. The wrench shall operate properly at an air pressure of 80 to 100
psig.
Table I
|
National Stock Number |
Spindle Square Drive Size |
|
NPTF |
CFM (Maximum) |
Developed Torque After 5 Seconds |
|
5130-00-234-4881 |
3/8 |
1-1/4 |
1/4 |
15 |
50 |
2.2 Material: The material used in the construction of the wrenches
shall be a good commercial quality suitable for the intended use purpose. All
materials used shall be free from defects and imperfections that may adversely
affect the serviceability of the finished product. A metal or composite housing
is required. Cadmium is not an acceptable plating on any component.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any other data which may improve this document should be sent to: General Services Administration, Federal Supply Service, Tools and Appliances Commodity Center (6FETE-CO), Washington DC 20406. |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business